Dynojet Flow Meter Instrukcja Użytkownika Pobierz pdf (Strona 13)

USER GUIDE

Flow Meter Testing

Version 1 Flow Meter User Guide

FILTER ASSEMBLY

1 Remove the filter bowl hose from the filter bowl.

2 Plug the filter bowl fitting with your finger.

3 Plug the exhaust inlet hose with your finger.

4Turn the air pump on.

5 Record the flow meter reading in a data table on page 16.

Note: The flow meter reading should be zero. If the flow is more than

two liters/minute the filter bowl has a significant leak.

6Turn the air pump off.

7 If the filter has a leak, clean and tighten all fittings and test again.

8 Remove the short hose from the filter fitting and the flow meter.

9 Attach the sensor hose to the filter.

10 Attach the filter bowl hose to the filter bowl.

Figure 6: Test Point Two—Filter Assembly

filter bowl hose

filter bowl fitting

plug with finger

exhaust inlet hose

plug with finger

sensor hose

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Brak uwag

Dynojet Flow Meter Instrukcja Użytkownika Strona 13